Canoe Trolling Motor Mount Bracket w/Aluminum Crossbar and Solid Ash Motor Block
This is heavy duty. The motor mount’s crossbar T0601 alumimum that is 3″ wide x 28.750″ and 3/8″ thick to help minimize motor vibration.The motor block is 1-7/8″ thick ash hardwood and sealed with a exterior acrylic urethane. It can be changed to a left or right hand mount by removing the block and reassembling on the opposite side. This mount requires no tools and can be tightened with one hand. Just set the clamps to the gunwale tighten the star bolt so that the wingnut engages the clamp hole then tighten down tight. The clamps work well on the majority of canoes but not all. Feel free to message me with your model. Depending on the model you may need a different clamping system. If yours is a Coleman, Pelican Ram-X , Grumman Eagle, Marine and other models, Old Town Saranac, Indian River or Bass Pro Ascend you’ll need a different clamping system that we will provide.
- Rugged heavy duty motor bracket that requires no tools to mount
- Unbendable 6061 aluminum
- 3″ wide crossbar minimizes motor vibration
- Full 28″ allows full range of steering motion
- Works on most canoes but not all canoes, Message me to confirm your canoe.
